Selaing the hull ( with normal resin )

As there was not enough wood sealer to go around for the hull Chris ( tutor ) made desision to seal it with normal resin. We used about 20 pumps on resin for the hull.  I recored the pumps just so we know how many we used. The resin was spread around by rollers as it was much easier to do so. In the photo below it shows how we did it. At the point where chris is pointing he was telling us that we didnt put on enough resin and it was abit dry so we had to go over it again. The resin socked into the seeder so we had to put on abit of resin in order to get the proper seal.             

In this photo were almost done sealing the hull, Taz is working on the final part at the Fp. we stopped around 400mm from the fp with the seal.