Glassing the Hull ( outside )

Were getting ready to glass the Fp on the hull. Taz is vacuming all the dust off the hull before we go on.                            

here im sanding the bow of the boat to get it fair.

Dry fitting the glass before moveing on and all the vacum tape has been put on. Were useing EDB-400 for the outside of the hull.

Dry Fitting glass.

Photo of me getting the glass on with rollers.        

We had around 5 people working on getting the glass down while we had 1 person mixing the resin for it. we Taz is working on getting the edges of the glass down while were getting putting on the resin on the glass.

Photo of us putting the resin onto the glass.      

Once all the glass was done and all our peel ply, perft plasic, mesh was down we put on the vacum bag and you can see us working on putting so darts in the bag.