Fairing Hull/Back filling

this photo here is of the hull once we flipped it over we had some help from the guys in the other class in order to have enough hands to flip it over.

we put the hull into the hot box and we were getting ready to fair it. There was not 2 much fairing to do because most of the boat was already fair.

here is a photo of the center case  before it was cut into position

working on the transom cutting off the planking on the back so it comes flush with the ap                                                  

here is a photo of me planeing the hull takeing all the glue bumps off and also getting it as much fair as possible before we started to do sanding

this photo here was taken once all of the sanding and planeing was done. as you can see Richard is feeling the hull with his hand if its fair.

once the center case was cut to shape and flush with the hull

once all the fairing was done on the hull we back filled, just to get all of the gaps closed that were on hull.